english  |  deutsch        Home  |  FAQ  |  Disclaimer  |  Contact      
   
 
 
Shows / Events
 
28. July 2014

UK EMS provider Chemigraphic increases SMT line utulisation by 20% using automated storage management systems ISM by Juki

Chemigraphic, one of the UK’s leading electronic manufacturing service businesses, continues the next phase of its investment cycle by purchasing JUKI’s new ISM systems in order to enhance their surface mount operations and the speed up time to market for their customers.

  
30. April 2014

Interview with Mr. Johann Weber, chairman of the board of Zollner Elektronik group

Zollner Elektronik AG is the largest and most influential EMS company in Europe. Within only 50 years they have succeeded to grow from a one-man business to a global corporation with 16 sites. Juki had the opportunity to question Mr. Weber, chairman of the board of Zoller Elektronik group, about the reasons for their success.

  
30. April 2014

One JUKI RS-1000N nitrogen oven covers the whole production of three SMT assembly lines at FERCAD Elektronik GmbH

The very successful medium-sized EMS service provider from North Rhine-Westphalia (Germany) continuously invests in new production equipment. That’s why FERCAD replaced their old mounters from a Korean provider with three new lines from Juki.

  
30. April 2014

THT components can be assembled on a competitive basis in Switzerland – a customer report of the EMS provider Grossenbacher AG in St Gallen

Automation instead of outsourcing is the key. Then, thanks to the automation, it’s still possible to have electronics production in a high-wage country like Switzerland. In this kind of production, a large number of THT components are still placed manually and that’s why, in many cases, the assembly is outsourced to low-wage countries. But Grossenbacher Systeme AG in St Gallen breaks new ground and counts on THT automation technology from JUKI Europe.

  
30. April 2014

At Juki “Industry 4.0” has already started

To get the highest achievable capacity within the production enviroment, the total line solution by JUKI will also include total software integration of the systems.

 

  
30. April 2014

JUKI expands its intelligent material management solution with the ISM500

The intelligent material management system from Juki is a resounding market success. More and more companies recognise that, with the optimisation of the material management, the SMT line efficiency can be increased by 20%.

  
30. April 2014

Juki expands its reflow oven product palette with the RS600

After the successful introduction of the JUKI reflow ovens RS1000 and RS800, the market demanded a shorter and price performance optimised JUKI oven. At the SMT Hybrid Packaging show in Nuremberg on booth 333 in hall 7 between 6th and 8th May 2014, the RS600 will be presented to the European market for the first time.

  
30. April 2014

Juki RV-1 – One machine with unlimited inspection possibilities

Equipped with a pioneering CVCS Clear Vision Capturing System, the RV-1 inspects the stencil printing, the assembly both before and after soldering as well as THT and SMT soldering joints and even UV protective coating in one single machine. Juki has succeeded in developing the most flexible inspection module ever.

  
30. April 2014

After the introduction success of the JUKI GL stencil printer, the palette is extended by the JUKI K3 large format printer

In a little over one year, JUKI has sold over 100 stencil printers in Europe and USA. Today, even large companies like Zollner Elektronik invest in JUKI line solution systems where, as well as printers, ovens and other complementary products are also on offer.

  
 
 
Latest News
 

UK EMS provider Chemigraphic increases SMT line utulisation by 20% using automated storage management systems ISM by Juki

Chemigraphic, one of the UK’s leading electronic manufacturing service businesses, continues the next phase of its investment cycle by purchasing JUKI’s new ISM systems in order to enhance their surface mount operations and the speed up time to market for their customers.

Interview with Mr. Johann Weber, chairman of the board of Zollner Elektronik group

Zollner Elektronik AG is the largest and most influential EMS company in Europe. Within only 50 years they have succeeded to grow from a one-man business to a global corporation with 16 sites. Juki had the opportunity to question Mr. Weber, chairman of the board of Zoller Elektronik group, about the reasons for their success.

One JUKI RS-1000N nitrogen oven covers the whole production of three SMT assembly lines at FERCAD Elektronik GmbH

The very successful medium-sized EMS service provider from North Rhine-Westphalia (Germany) continuously invests in new production equipment. That’s why FERCAD replaced their old mounters from a Korean provider with three new lines from Juki.

THT components can be assembled on a competitive basis in Switzerland – a customer report of the EMS provider Grossenbacher AG in St Gallen

Automation instead of outsourcing is the key. Then, thanks to the automation, it’s still possible to have electronics production in a high-wage country like Switzerland. In this kind of production, a large number of THT components are still placed manually and that’s why, in many cases, the assembly is outsourced to low-wage countries. But Grossenbacher Systeme AG in St Gallen breaks new ground and counts on THT automation technology from JUKI Europe.