 |
|
Height measurement system (HMS)This system automatically measures the component height in the tape or stick at the pick position and saves the data in the placement program, thus increasing pick-up reliability and further reducing set-up time. Currently available on KE Series only. |
 |
|
Component verification (CVS)Resistors, capacitors, and 2-pin diodes can be checked for correct polarity and verified electrically. The CVS option uses specially designed insulated pick-up nozzles. |
 |
|
Spezial nozzlesJuki offers a wide range of special gripper and vacuum nozzles. |
 |
|
Feeder position indicator (FPI)If the machine fails to pick a component or if a part runs out, the feeder position is indicated by an LED. This function is also active during the teaching of feeder positions. |
 |
|
Rear operation unitIn order to offer the same operational ease as at the front side of the machine, a second monitor, track ball, and keyboard can be installed at the rear side. |
 |
|
Flex Calibration System (FCS) Many companies' Quality Management Systems require periodic Machine Capability Analyses (MCA) on their production equipment. The FCS system allows an automatic measurement of your Juki machine and documents the accuracy of the system with the possibility to correct any deviations. |
|
|
Auto-width conveyor (AWC)This option automatically adjusts the width of the PWB conveyor when a production file is opened. |
)
)
)
)
)
){kind=link}
){kind=link}
