Deutsch      Englisch  
 
 

KE-2060R

High-speed Fine Pitch Assembler



Placement head:
Quadruple head with
multi-nozzle laser alignment and
multi-nozzle vision centering
(MNVC - optional)
1 high-precision placement head with
vision and laser alignment
Placement rate:
12,500 cph  (IPC 9850)
3,400 cph Fine-Pitch  (with MNVC)
Component range:
0201 (inch)
High-precision head:
Up to 75 x 75mm or 50 x 150mm
Placement accuracy:
High-precision head (vision centering):
±30µm (3 Sigma)
Laser alignment:
±50µm (3 Sigma)

 

Assembly Machines


FX-3     New!

KE-2060 light     New!
> limited edition

KE-2070 
KE-2080 

KE-2050R 
KE-2060R 

FX-1R       


Technical Information
 

Reliable measurement of fine-pitch components
Lighting is the essence of any vision system. It defines reflections, shadowing and contrast. In order to measure standard components as well as very delicate ones Juki has developed an extensive and extremely versatile lighting system (FlexLighting). The system uses three different illumination angles and colors. Optimum illumination is stored in the software database for all standard components. The operator can quickly adapt all parameters for new and special component types.


FlexLighting

Higher throughput for fine-pitch components
Using the optional multi-nozzle vision centering (MNVC), fine-pitch components up to 20 x 20 mm can be measured and centered on the quadruple placement head. This almost doubles the placement rate for small fine-pitch components.

MNVC