We offer a complete assortment of tape, stick, bulk and belt feeders. All models are fully compatible with all 700 and 2000 series machines. Most feeders have no wires or hoses to connect, making it simple and fast to change a feeder.
| Tape Feeder |
Cast main body and three positioning pins result in superior pick accuracy. No hoses or wires to connect make changing this feeder a simple operation. Applicable are tape reels and adhesive tape reels which conform to the EIAJ standards. Tape Feeders are available in 8 to 72 mm sizes. |
|
| ATF Feeder |
Spliceable feeder for emboss and paper tape. The ATF feeder is based on the same technology than the standard tape feeder an available for 8mm to 24mm tape. The 12mm, 16mm, 24mm have a deeper emboss ditch which makes effective response to large capacitor. Furthermore, as for the 24mm feeders, large package for BGA is available for "AF24FS-OP".
Additional tape width will follow. |
|
| Stick Feeder |
A stick feeder is driven by belt without requiring any power or air supply. It feeds any ordinary SOP, SOT and PLCC which are packaged in stick form. Due to the various possibilities of adjusting the size of the lane, the feeder can easily be adapted to many different component types. Call your Juki Automation Systems office or local distributor for handling of special components supplied in sticks. |
|
| Bulk Feeder |
A bulk feeder dispenses components which are stored in a bulk case, using a unique rotary positioning mechanism to position and orient components and feed them to the pick-up position using a stainless steel belt. Available for Chips of 0402 to 0805 sizes. |
|
Belt Feeder |
A belt feeder accepts components packaged in stick form and presents them to the placement machine head. A variety of feeder widths and lane configurations are available. |
|
Deep Pocket Feeder |
With the new FTFR feeders the focus was set on a larger pocket depth. Now pockets of up to 25mm can be processed over the 32 to 56mm feeders. A number of mechanical improvements not only increase the ease of use, but also enhance the feeding stability as well as the pick position accuracy. |
 |
| IC Collection Belt |
The IC Collection Belt collects components whose leads or balls are found bent, skewed or damaged by the VCS. The feed pitch can be user defined. |
 |
| Feeder Calibration Kit |
With the help of the Feeder Calibration Kit the customer can adjust and calibrate misaligned and older feeders. |
|
)
)
)
)
)
)
)
)
